Figured I would update my status on my FIT - She is running Great - I DeTuned her for Daily driving and Fuel economy. :vtec:
Suspension is getting an overhaul by
ProgressAuto I lowered the car 1" so she sits alot more closer to the ground and so far have not had any issues with aligenment and premature tire ware (except for full throttle pulls)
Engine currently has 13k on it mostly highway being from Seattle to LA, 4 times now (and 2 time attacks, 1 import battle, and 1 super lap battle Track events) My plans are to Remove the Eton Charger and replace it with a
Kraftwerk's Race kit and custom intercooler with Tial BOV.
Transmission LSD is due for an overhaul with the ammount of punishment I put on this car on a daily basis and track events, the LSD is losing some grip, but thats ok its easy fix.
Tuning has been great , easy to do with
Hondata Kpro engine management. I have been able to address any issues with the engine with Kpro - only thing that has come up was poor fuel mileage do to a conector melting.
Tires I have gone threw 3 sets now , ( 2 sets ) falken azenis rt-615, goodyear fierce currently on car now. I prefer the RT-615s but would rather be on Potenza S-03 Pole Position.
Interior is still stock for my Daughter to transport her anywhere I need to go holding up good with the damage from Dog, and family. :rotfl: and Screaming friends when I take them for a, " Hey let me see what your FIT can do"
so enough talk here are some pics.

---------------------------------------------------------------------------------------
Older pictures Below---------------------------------------------------------------------------------------
Enkei's [SIZE=+1]SCO3 [/SIZE][/B]-----------------------------------[/B]

Advans RG 2 17" ------------------------------------------- 
Before the charger ------------------------------------------
Home made intake, I used an RSX type S CAI and cut the bend off it. I would like to get something made that has the correct inlet dia, this one is a little to small.
Drive by wire-------------------------------------------
Jackson racing supercharger kit ----------------------------
MossPerformance.com High Performance Parts & Accessories 


06 Civic Si pedals ---------------------------------------------
Rear Brakes ----------------------------FastBrake Enterprises, LLC - Intro 

Progress suspenion-------------------The Progress Group, Inc. Online Store 
FastBrake Enterprises, LLC - Intro
Progress suspenion-------------------The Progress Group, Inc. Online Store 
One Time attack that I atended. 


Current list of parts that I can think of off the top of my head.
K20Z3 Engine and transmission
RSX shift linkage
stage 2 axles
Jackson racing custom swap header
Jackson racing Fit exhaust
Jackson racing supercharger
hondata Kpro
Hasport mounts, and adaptor harness
06 Si shift knob
06 Si pedals
racer coated valve cover
Advan RG2 with falken tires Rt 615
Fast brakes.com rear disc convertion
Fast brakes.com front brake upgrade
Progress auto street coilover s in front and street shock and springs in back
Progress auto Rear sway bar'
I am dealing with a little over heating, the engine gets up to 210 on the track and daily driving gets to 205 sometimes higher, so I put some hood risers in the back of the hood to lift it up and let some air escape, but I need to get a vented hood to help more. I also have 2 thin fans on the raidiator that help but I think I might need to get an aftermarket one to get the temps down. I m allready using 1 step cooler spark plugs, and on the dyno with air the car is fine. its the stop and go traffic that is the issuse.
some other misc stuff.
At the Sema show
At hot import nights
